Pipe/Tubing | Rod/Bar | Sheet/Plate | Fasteners | Roof Drainage Products | Solder Fittings | Download Copper Catalog (1.1 MB)

C10200 - Copper 10200 is a oxygen-Free High Conductivity Copper is produced by melting and pouring Copper in the presence of carbon or carbonaceous gases, so that no oxygen can be absorbed. No deoxidizing agent is required. It combines most of the advantages of ETP and Deoxidized Copper. It is excellent for deep drawing, has a high electrical and thermal conductivity, and resists the embrittling effect of reducing gases (hydrogen) on equipment operated at elevated temperatures, although it is not as suitable for welding as Deoxidized Copper. Copper 10200 is specially good for severe deep drawing, spinning, and close radius bending, and is used in electronic tubes or similar applications because it makes a perfect seal to glass. For electrical uses requiring conductivity higher that Deoxidized Copper affords, Oxygen-Free Copper is usually specified.

C11000 - Copper 11000 is a electrolytic Tough Pitch Copper has long been the standard type of commercial wrought copper used for the production of wire, rod, plate, sheet and strip. The presence of very small amounts of oxygen affects some of the mechanical properties to a measurable extent, but this grade of copper is entirely satisfactory for most of the usual processes. Copper 11000 is easy to deep draw, spin, or stamp. It is the logical choice for bus connections, switch and panel boards, circuit breakers, and power feed systems in general, because of high electrical conductivity, ease of soft or silver soldering and ability to receive a silver plate. Expansion joints, kettles, vats, pressure vessels, distillery and other process equipment are readily formed from the metal. Copper 11000 is resistance to corrosion assures a long life. For welding and high temperature applications see Deoxidized Copper and Oxygen Free Copper.

  C12200 - Copper 12200 is a deoxidized Copper is produced by introducing phosphorus or another element as a deoxidizing agent to assure the removal of all oxygen. This type differs from ETP Copper in that it has lower electrical and thermal conductivity, but it forms and bends more readily in difficult applications. It is particularly suitable for applications requiring hot working, annealing soldering, brazing or welding, operations in which the residual phosphorus prevents the absorption of oxygen by the copper. If copper 12200 sheets or plates are to be welded, this type of copper is preferred because of its resistance to embrittlement by reducing gases, such as hydrogen, at high temperatures. Deoxidized Copper is widely used for pipe and tube for plumbing, gas and oil lines, refrigeration, condensers, pulp and paper lines, brewery and distillery tubes, brew kettles, vats and industrial tanks.

Construction (Roofing) Copper - Any roofing copper with a minimum copper content of 99.5% to be used in building construction. Copper has been valued for centuries as a roofing material, for its aesthetically pleasing green patina that forms over time. It is also very economical, as many copper roofs have lasted up to 100 years and it is 100% recyclable. The roofing copper specification, ASTM B370 allows a slightly broader chemistry than does ASTM B152. Copper sheet 10 oz through 48 oz in our inventory is referred to as roofing copper.

O60 - Soft Annealed

H00 - Cold Rolled, equals 1/8 hard

H01 - Cold Rolled, equals 1/4 hard

  H02 - Cold Rolled, equals 1/2 hard

H04 - Hard

H80 - Hard Drawn


Information provided on this website is for general information purposes only and subject to alteration without notice. Alaskan Copper & Brass Company and Alaskan Copper Works do not accept responsibility for errors or for information which is found to be misleading. Suggestions for or descriptions of the end use or application of products or methods of working are for information only and the company and its subsidiaries accept no liability in respect thereof. Before using products supplied or manufactured by the company, customers should satisfy themselves of their suitability.